Справочник Пользователя для HP (Hewlett-Packard) 8360

S

SYSTEM

8

This 

 allows up to eight different front panel settings to

be stored in memory registers 1 through 8. Synthesizer settings
can then be recalled with the 

 key. A memory register

can be alternated with the current front panel setting using the

 Regs 

The information stored in memory registers is retained in memory

indefinitely when ac line power is constantly available, or for

approximately three years without line power. Pressing 

 does

not erase the memory registers (1 through 8).

Register 0 is a memory register also. It saves the last front panel
settings automatically) and can not be accessed through the 

key. Likewise, register 9 is reserved for user preset storage and can
not be accessed with the [SAVE) key. Pressing 

 erases register

0, but not register 9.

 <num>

The above is an IEEE 488.2 common command.

 where 

 a numeric value from 1 to 8.

 Regs, Clear 

Memory, 

 Save Lock

“Saving and Recalling an Instrument State,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.