Справочник Пользователя для HP (Hewlett-Packard) 8360

Leveling with a power meter is similar to leveling with a diode

detector. Figure 1-13 shows the setup for power meter leveling.

1. Set up the equipment as shown. Be sure to set the power meter to

manual range mode and note the range.

2. Refer to menu map 1.
3. Press 

 Select 

 Point 

 .

 

Select 

 

 Range. Enter the range value set for the power

meter as noted in step 1.

6. Select Coupling Factor , press 

 

Unlike detector leveling, power meter leveling provides calibrated

power out of the leveled RF port.

To obtain flatness corrected power refer to “Optimizing Synthesizer
Performance, Creating and Applying the User Flatness Correction
Array,” later in this section.