Справочник Пользователя для Korg MICRO

Connect these to your powered 
monitors, stereo amp, mixer, or 
multi-track recorder.
If you want to use the microKORG 
in monaural, connect the L/MONO 
jack.

Connect a pair of 
headphones to this jack 
(1/4" stereo).

Received MIDI data is 
re-transmitted without 
change from this 
connector. Use this 
when you want to 
connect multiple MIDI 
devices to the same 
"stream" of data.

This connector 
transmits MIDI data.

This connector receives 
MIDI data.

MIDI 
Use these connectors to connect the microKORG to an external MIDI 
device so that MIDI data can be exchanged.

If a mic is connected to the DYNAMIC 
or CONDENSER jack, set this switch to 
the MIC position. If an external 
sequencer or audio device is connected, 
set this switch to the LINE position.

Adjusts the input level from the 
DYNAMIC

 or CONDENSER jack.

Connect a condenser mic to this jack.

Connect a dynamic mic, synthesizer, or 
audio device to this jack.
If both the DYNAMIC jack and the 
CONDENSER

 jack are connected, the 

audio signal from the CONDENSER jack 
will take priority.

AUDIO IN 1
A Synth program can use an audio signal from a synthesizer or external device 
connected here as the oscillator 1 waveform.
A Vocoder program can use an audio signal from a mic etc. connected here as the 
modulator audio.

Adjusts the input level 
from the LINE jack.

Connect a synthesizer 
or audio device here.

A Synth program can use an audio signal from an 
external device connected here as the oscillator 1 
waveform.
A Vocoder program uses this input signal as the 
external carrier for the vocoder.

Power switch
Switches the power on/off. (➝p.6)

AC adaptor jack
Connect the included AC adaptor to 
this jack. After connecting the AC 
adaptor to the microKORG, plug it 
into an AC outlet.

Mic holder
You can attach the included 
mic to this holder (➝p.5).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○