Справочник Пользователя для Fostex VF80EX

80

Advanced Operations (VF80EX)

To select the desired program, while stopped, press
the 

key while holding down the

 key, and select the program using the 

dial, then press the 

 key.

The VF80EX enters the mastering mode and the dis-
play shows the mastering screen in which you can
adjust the mastering effects.
The 

 key lights up in red, while the 

 keys of tracks 7/8 and the master

channel light up in green.

Before performing internal mastering, you can rehearse it as many times as you like, while adjust-
ing the track 7/8 level and sound effects.
In the following description, we assumes that a stereo pair of materials is recorded on tracks 7/8 of
the current program and a pair of headphones is connected to the [PHONES] jack for monitoring.

The VF80EX starts playback, while the display keeps
showing the screen for adjusting the mastering effects.
Tracks 1 and 2 are internally set to 

,

allowing you to check over-level via the peak LED
indicators.
You can monitor the mastering sound through
headphones by raising the track 7/8 fader and/or

 level control.  The mastering levels are

shown on the level meters at the right on the screen.

Set the levels properly so that the PEAK LED indica-
tors do not flash or light frequently.
Note that levels may increase  by changing EQ or
compressor parameters. When controlling the sound
characters and level, you should not only monitor the
level meters and listen to the sound, but also monitor
the PEAK LED indicators.

To adjusting the mastering effect parameters on the
mastering screen, use the 

 (

 /  ) keys to

select a parameter and the 

 dial to change the

parameter value.

∞

∞

∞

∞

∞

∞

∞

∞

[TRACK EDIT]

1

[MASTERING]

3

[ENTER/YES]

1

1

[JOG]

1

[SHIFT]

4

[PLAY]

5

[7/8 FADER]

2

[MASTER FADER]

[PHONES]

5

6

[STOP]

7

[STOP] + [REWIND]