Справочник Пользователя для Siemens L-850D/E F-Range Style 2 Inset Lights

L-850D/E F-Range Style 2 Inset Lights 

General Information and Requirements



 2002 Siemens Airfield Solutions, Incorporated

96A0266D

7

All rights reserved

Issued 2/02

Each unit is supplied completely assembled, tested and sealed, ready for
installation. The electrical connection is made via 1, 2 or 3 cable assemblies with
FAA L-823 style 2-pole plugs. The 6 mounting screws (A1) and lock washers (A2)

or self locking nuts for holding the light on the base or adapter ring are included.
They can be either M10 or 3/8” UNC, according to order. An o-ring gasket (E6) is
also included.

Each unit is individually packed in a durable, cushioned and corrugated cardboard
box, labelled with Siemens Airfield Solutions and ordering numbers.

At least one instruction manual is delivered per order.

For some applications, optional film disc cut-outs are available. They form an
electrical bypass over the lamp within 15 seconds after lamp failure. After a lamp
failure, the film disc cut-out must be replaced.

Ordering codes and reference data pertinent to the light fixture and its components
are listed in the tables on pages 30 to 44.

All the inset lights used for a particular function look externally identical. The
differences between versions depend on the beam colour and the optical support
inside. Make sure to use the correct version when installing the light onto its base.

The colors of the light beams are identified by colored points on the top of the
window. A red point, for example, refers to a corresponding red colored beam.

In the 12” F-Range inset lights, light beam coloration is obtained by a dichroïc
coating applied on the inner face of the prism. Therefore, no separate color filters
are required.