Справочник Пользователя для 3com Switch 4500 26-Port
42
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
For a detailed description of how automatic IP configuration operates,
refer to the Configuration Guide available on 3Com’s Web Site at
www.3com.com.
refer to the Configuration Guide available on 3Com’s Web Site at
www.3com.com.
You should use the automatic IP configuration method if:
■
your network uses DHCP to allocate IP information, or
■
flexibility is needed. If the Switch is deployed onto a different subnet,
it will automatically reconfigure itself with an appropriate IP address,
instead of you having to manually reconfigure the Switch.
it will automatically reconfigure itself with an appropriate IP address,
instead of you having to manually reconfigure the Switch.
If the Switch is not allocated with an automatic IP address, the IP
configuration will be blank or shown as ‘’’’.
configuration will be blank or shown as ‘’’’.
If you use the automatic IP configuration method, you need to discover
the automatically allocated IP information before you can begin
management. Work through the “Viewing Automatically Configured IP
Information” section on page 49.
the automatically allocated IP information before you can begin
management. Work through the “Viewing Automatically Configured IP
Information” section on page 49.
Preparing for
Management
Once your Switch’s initial set up is complete you can set up your chosen
management method as described in “Methods of Managing a Switch”
on page 38.
management method as described in “Methods of Managing a Switch”
on page 38.
For detailed information about the specific web interface operations and
command line interface commands and problem solving, refer to the
“Command Reference Guide” available on 3Com’s Web site at
www.3com.com.
command line interface commands and problem solving, refer to the
“Command Reference Guide” available on 3Com’s Web site at
www.3com.com.