Справочник Пользователя для Tascam DM-3200

Use the POD 3 encoder to select banks of eight chan-
nel modules at a time, and the display changes as 
these are selected. You can also select busses in 
groups of eight, as well as the aux sends (see below). 

Use the wheel or left and right cursor keys to navi-
gate round the screen (you can also use the 

 keys 

or fader selection), and the 

 key to assign and 

de-assign busses or the stereo (

ST

) or direct outputs 

(

DIR

). As you make and break these assignments, the 

indicators by the control surface keys mirror the 
screen settings (and the other way round).

There is an invisible “pan switch” 

which links and unlinks pairs of busses (this also 
depends on the linked pan mode). 

When this switch is set, and busses are linked, they 
are also joined for panning and they are assigned in 
pairs.

However, when this switch is not set, the buss pairs 
can be split for individual assignment.

In Figure 4.7, Buss assignments with the pan switch 
off, channel module 3 is selected, and assigned only 
to buss 3, which has been separated from buss 4.

The linked pan mode (“BUSS Link/BUSS PAN are 
Linked” on page 35) also determines whether split-
ting a buss pair either splits the busses for channels 
individually (as in the example screen above), or all 
together for all channels. When this parameter is set 
off, buss pairs may be split individually, and when it 
is on, buss pairs are split together.

Note that buss assignment is also connected to mod-
ule linking. In this illustration, channels 1 and 2 are 
linked, but are assigned to busses 1 and 2. In this 
case, the assignments are linked, so assigning chan-
nel 1 to buss 1 also links channel 2 to buss 1.