Справочник Пользователя для Tascam DM-3200
8 – Remote operation : Selecting devices for transport control
96
TASCAM DM-3200
User’s Manual
When the scan is complete, a pop-up screen appears,
showing the detected devices and their assignments
to the control maps.
showing the detected devices and their assignments
to the control maps.
Any selected devices that may be controlled are
detected and a new map is created for each such
device.
detected and a new map is created for each such
device.
A message is shown if there are more devices con-
nected than can be added to the list (that is, more than
10).
nected than can be added to the list (that is, more than
10).
If there are IDs associated with the devices, these are
also shown.
also shown.
To use a transport mapping
Of course, at least one transport mapping must exist
before this operation can be carried out.
before this operation can be carried out.
1
Press and hold down the
MACHINE SEL
(
F7
)
key.
2
Press the numeric key corresponding to the
map you want to use (
map you want to use (
0
through
9
).
The DM-3200’s transport control keys will now con-
trol the device selected in that map and the other
mapping features will also be enabled. A popup
shows the currently-recalled memory (or a message
if no mapping has been recalled).
trol the device selected in that map and the other
mapping features will also be enabled. A popup
shows the currently-recalled memory (or a message
if no mapping has been recalled).
The
MAP
field at the lower part of the screen shows
the currently-loaded map.
Viewing the transport mappings
To view the transport mappings (that is, the list of the
devices that will be controlled in each mapping):
devices that will be controlled in each mapping):
1
Press and hold
SHIFT
and press the
LOCATE
LIST
(
F8
) key. The device controlled in each
map, together with its ID, is shown.
2
Press the
ENTER
key to continue operations.
Editing a mapping
When a mapping has been made, parameters other
than the transport control may be edited (for instance,
the use of the
than the transport control may be edited (for instance,
the use of the
REC
keys).
To make these changes a permanent part of the cur-
rently-loaded map:
rently-loaded map:
1
Move the cursor to the number by the
MAP
field.
2
Use the dial to select the mapping memory
into which the current mapping will be stored.
Press
into which the current mapping will be stored.
Press
ENTER
.
3
Press
ENTER
(the on-screen
STORE
button).