Справочник Пользователя для Yamaha RX-Z11
![Yamaha](https://files.manualsbrain.com/attachments/884c61a284ec9743365c8176528d257dbb7df7e8/common/fit/150/50/873735ee4330929e1549bc72378da029dfa61bac72d66c1f7587e7b724ba/brand_logo.png)
Remote control features
129
En
Ad
v
v
a
nce
d
Op
eratio
eratio
n
■ Default macro functions
*1 Set the appropriate remote control code for TV in advance (see
page 124).
*2 This unit plays the last received station or selected contents before the
unit was set in the standby mode.
■ Programming macro operations (MACRO)
You can program your own macro and use the macro programming
feature to transmit several remote control commands in sequence at
the press of a button. Be sure to set up remote control codes or
perform learning operations before programming the macro.
feature to transmit several remote control commands in sequence at
the press of a button. Be sure to set up remote control codes or
perform learning operations before programming the macro.
• The default macro is not cleared when a new macro is programmed for a
button. The default macro can be used again when the programmed macro
is cleared.
is cleared.
• It is not possible to add a new signal (macro step) to the default macro.
Programming a macro changes all macro contents.
• We do not recommend that you program continuous operations (for
example, volume control) in a macro.
1
Press G
SETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window (4).
“SETUP” appears in the display window (4).
2
Press 9k / n repeatedly to select “MACRO” and then
press 9
press 9
ENTER.
The remote control enters the macro-programming mode.
“MACRO” and “M:the three-letter name of the selected control
area” (for example, “M:DVD”) appears in the display window
(4) alternately.
“MACRO” and “M:the three-letter name of the selected control
area” (for example, “M:DVD”) appears in the display window
(4) alternately.
3
Press the desired macro button you want to assign
the macro program to and then press 9
the macro program to and then press 9
ENTER.
“M:the three-letter name of the selected macro button” (for
example, “M:DVD”) and the name of the currently selected
control area appears in the display window (4) alternately.
When you press DSTANDBY or EPOWER, “M:STB” or
“M:PWR” and the name of the currently selected control area
appears in the display window (4) alternately.
example, “M:DVD”) and the name of the currently selected
control area appears in the display window (4) alternately.
When you press DSTANDBY or EPOWER, “M:STB” or
“M:PWR” and the name of the currently selected control area
appears in the display window (4) alternately.
4
Press the buttons for the functions you want to
include in the macro operation in sequence.
include in the macro operation in sequence.
Pressing
macro
To automatically transmit these signals
First
Second
—
(U.S.A. and
Canada
models)
(Australia
model)
STANDBY
STANDBY
POWER
POWER
POWER
TV
(*1)
MULTI
MULTI
V-AUX
V-AUX
PHONO
PHONO
MD
TAPE
MD
TAPE
BD
HD DVD
BD
HD DVD
DVD
DVD
CD
CD
CD-R
CD-R
CBL
SAT
CBL
SAT
DTV
DTV
DVR
DVR
VCR
VCR
TUNER
TUNER
DOCK
DOCK
NET
USB
NET
USB
(*2)
XM
XM
(*2)
Notes
SETUP
MACRO
M:DVD