Инструкции Пользователя для Frigidaire FGID2466QW

OPERATING INSTRUCTIONS

Sanitize Option

To sanitize your dishes and glassware, select

the SANITIZE option. When selected, the

indicator light will come on and remain on until

the end of cycle. The water temperature in the

fi nal rinse will be raised to 156

F (69

C). This

option is available in POWER PLUS, NORMAL

WASH and TOP RACK Cycles. Only these

sanitization cycles have been designed to meet

NSF requirements.

The cycle time will be extended until the proper

water temperature is reached.

Washing

action will continue during the water heating

delay. For best results, the incoming water

temperature should be at least 120

F (49

C).

The sanitize criteria may not be satisfi ed if there

is an interruption of the cycle, power failure or if

the incoming water temperature is below 120

(49

C).

To turn off the SANITIZE option, press

SANITIZE a second time. The indicator light will

turn off.

Delay Start

The DELAY START option allows you to

automatically delay starting your dishwasher

1-24 hours.
To start the DELAY START option, press DELAY

START until the desired delay time shows in the

STATUS window. A light will come on indicating

the delay has been set and will remain on until

cycle starts.
To cancel the DELAY START option and to

begin the selected cycle before the delay

period is over, press START/CANCEL twice.

Heat Dry/Air Dry

Use of the HEAT DRY option, especially in

combination with use of rinse agent, will

enhance drying. If AIR DRY is selected the

heater will be de-activated during the drying

phase of the selected wash cycle. This will

slightly lower the energy use but will increase

the likelihood that the dishware will not dry

completely.

Child Lock Controls

To prevent children from accidently changing

the dishwasher cycle or starting the

dishwasher, lock the dishwasher controls

by press and hold the DELAY START for 3

seconds. An indicator light on the lock graphic

pad will illuminate when the controls are locked

and no new selections can be made until the

lock is released. To unlock the controls, press

DELAY START again for 3 seconds, and the

indicator light will go out.

To Cancel a Cycle

You can cancel a cycle anytime during

the cycle. Press START/CANCEL and the

dishwasher will start a 90 second drain. At the

end of the drain, select the next desired cycle.

Favorite Cycle

The FAVORITE CYCLE option allows you to

program your preferred cycle and options into

one button. Once Programmed, simply select

FAVORITE CYCLE and then select START/

CANCEL.

CANCEL.
To Program the FAVORITE CYCLE:

To Program the FAVORITE CYCLE:
1.

1. Select your preferred cycle and options

Select your preferred cycle and options

2. Press FAVORITE CYCLE for 3 seconds.

Press FAVORITE CYCLE for 3 seconds.

The display will fl ash for 2 seconds indicating

the FAVORITE CYCLE option has been

programmed. To change the FAVORITE

CYCLE option simply repeat steps one and

two above.

Sahara Dry

When SAHARA DRY

option is selected,

the dishwasher extends drying time by

approximately 20 minutes. The SAHARA DRY

option can be used with all cycles except

CHINA CRYSTAL, ENERGY SAVER and RINSE

ONLY. For best drying performance, also apply

an increased wash temperature by selecting

HI-TEMP WASH or even better, the SANITIZE

option.

option.
The energy required to use the SAHARA DRY

The energy required to use the SAHARA DRY

option costs pennies per cycle. You may

choose not to select the SAHARA DRY

option;

however you may have items in your dish load

that will not be completely dry at the end of

the cycle.