Справочник Пользователя для 3com 206380-A
Software Installation
206380-A
3-33
4.
Copy the following file from the BayStack 22 PCMCIA Card Adapter
Software & Documentation CD to the root directory.
Software & Documentation CD to the root directory.
•
\ENABLER\B22ENA10.EXE
You can also run the BS22ENA10.EXE program from the BayStack 22
PCMCIA Card Adapter Software & Documentation CD instead of copying
the program to your root directory.
PCMCIA Card Adapter Software & Documentation CD instead of copying
the program to your root directory.
5.
Access a DOS prompt screen.
From the DOS prompt you must run the BS22ENA10.EXE program before
installing the BayStack 22 network driver.
installing the BayStack 22 network driver.
6.
Enter the following syntax:
B22ENA10 [/IRQ:x][/IOP:xxx]
where:
•
IRQ is the interrupt number used specifically for the BayStack 22
network card. This number must not be used by any other device in the
system. The default IRQ value is 3.
network card. This number must not be used by any other device in the
system. The default IRQ value is 3.
•
IOP is the starting Input/Output (I/O) port address, in hexadecimal
format. The BayStack 22 network card requires 32 consecutive free
I/O port addresses. The default IOP value is 0x300.
format. The BayStack 22 network card requires 32 consecutive free
I/O port addresses. The default IOP value is 0x300.
For example, the following command enables a BayStack 22 network card
having an IRQ value of 5 and an IOP value of 300:
having an IRQ value of 5 and an IOP value of 300:
B22ENA10 /IRQ:5 /IOP:300
7.
Change to the Novell NetWare server directory.
For instance, type the command:
CD\NWSERVER
8.
Type:
SERVER
9.
Press Enter.
10.
At the server prompt, enter:
LOAD INSTALL
The NetWare Server Installation Utility loads.
11.
From the Installation Options menu, select Driver options.