Справочник Пользователя для Danby DDW611WLED
Troubleshooting
Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this troubleshooting guide for
a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-
263-2629 for assistance.
a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-
263-2629 for assistance.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Dishwasher doesn’t
run
run
• Fuse blown or circuit breaker tripped.
• Power supply is not turned on.
• Water pressure is low.
• Replace fuse or reset circuit breaker.
• Make sure dishwasher is turned on and
door is closed. Plug in cord securely.
• Make sure dishwasher is turned on and
door is closed. Plug in cord securely.
• Check that water supply is connected and
the water is turned on.
the water is turned on.
Noise
• Some audible sounds are normal.
• Utensils are not secure in basket / some-
thing small dropped into basket.
• Motor hums.
thing small dropped into basket.
• Motor hums.
• Sound from soft food shredding action
and detergent cup opening.
• Ensure everything is secured in the dish-
washer.
• If you do not use often, dishwasher
may hum- remember to fill and pump
out appliance every week to keep the seal
moist.
and detergent cup opening.
• Ensure everything is secured in the dish-
washer.
• If you do not use often, dishwasher
may hum- remember to fill and pump
out appliance every week to keep the seal
moist.
Suds in the tub
• Improper detergent.
• Spilled rinse agent.
• Use only dishwasher detergent to avoid
suds. If suds are present, open the door
and let suds evaporate.
• Always wipe rinse agent spills immediate-
ly.
suds. If suds are present, open the door
and let suds evaporate.
• Always wipe rinse agent spills immediate-
ly.
Dishes are not dry
• Rinse agent dispenser is empty.
• Make sure that the rinse agent dispener is
filled.
filled.
Dishes and flatware
are not clean (spots
filming)
are not clean (spots
filming)
• Improper program selected/run.
• Improper rack loading.
• Improper rack loading.
• Extremely hard water.
• Select a stronger program.
• Make sure that the detergent dispenser
and spray arms are not blocked by large
dishware.
• Remove all metal utensils from dishwash-
er
• Make sure that the detergent dispenser
and spray arms are not blocked by large
dishware.
• Remove all metal utensils from dishwash-
er
Detergent left in dis-
penser cups
penser cups
• Dishes blocking detergent cups.
• Re-load the dishes properly.
Water standing in
the bottom of the
tub
the bottom of the
tub
• This is normal.
• A small amount of clean water around the
outlet on the tub button at the back of the
tub keeps the water seal lubricated.
outlet on the tub button at the back of the
tub keeps the water seal lubricated.
Water doesn’t pump
out of the tub
out of the tub
• Drain is clogged.
• Pump motor faulty.
• Make sure the kitchen sink is draining
well. If the dishwasher drains into a dispos-
er, run it clear.
• Have it checked by a qualified technician.
well. If the dishwasher drains into a dispos-
er, run it clear.
• Have it checked by a qualified technician.
Dishwasher leaks /
steams
steams
• Overfill dispenser or rinse aid spills.
• Dishwasher isn’t level.
• Steam is normal.
• Dishwasher isn’t level.
• Steam is normal.
• Be careful not to overfill the rinse aid
dispenser. Spilled rinse aid could cause
oversudsing and lead to overflowing. Wipe
away any spills with a damp cloth.
• Make sure the dishwasher is level.
• Steam coming through the vent by the
door latch is normal during drying and
water draining. 9
dispenser. Spilled rinse aid could cause
oversudsing and lead to overflowing. Wipe
away any spills with a damp cloth.
• Make sure the dishwasher is level.
• Steam coming through the vent by the
door latch is normal during drying and
water draining. 9
PROBLEM
POSSIBLE CAUSE
SOLUTION
20