Справочник Пользователя для Black Box ET0010A

Managing Appliances

126

EncrypTight User Guide

6 Click Upgrade. ETEMS confirms that the FTP site is reachable before it begins the upgrade 

operation. Upgrade results for each appliance are displayed in the Result column of the Upgrade 
Appliances table.

7 Upgrading the software version on the appliance does not automatically update the ETEMS 

configuration. After the appliances have been rebooted, you can edit the ETEMS configurations to 
reflect the new software version running on the appliances (Edit > Multiple Configurations > 
Software Version). 
The appliance will operate properly with the upgraded software regardless of whether the ETEMS 
configuration is updated to reflect the new software version. However, new configuration options will 
not be reflected in the Appliance editor until the ETEMS configuration is updated with the new 
software version. 

●

●

●

●

●

Host

IP address of the management workstation running the FTP server software. 

If you are retrieving log files from a host that has already been configured, 

you can select its IP address from the Host box. ETEMS completes the 

remaining FTP server information for you based on the selected host IP 

address.
ETEP 1.6 and later appliances support IPv4 and IPv6 addresses. If you are 

using an IPv6 host address, all of the selected appliances must support 

IPv6.

Path 

The directory on the FTP server that contains the files of interest. Valid 

entries are the default FTP directory and its subdirectories. Enter the 

directory listing relative to the default directory. If the files are located in the 

default directory, leave this field blank. 

User 

User ID of a user on the FTP server. Do not use the following characters: @ 

: ? # < > &

Password

Password associated with the user name. Do not use the following 

characters: @ : ? # < > &

Connection Method

FTP is the default file transfer protocol and is supported on all appliance 

models and software revisions. 
SFTP provides secure file transfer. It is supported on ETEP appliances 

running version 1.6 and later software.