Справочник Пользователя для Homesmart Appliance SRS-LYNC-XL
APPENDIX C
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
REMOTELY MANAGING YOUR ROOM SYSTEM USING INTEL AMT
126
smarttech.com/kb/170450
Control
Procedure
Notes (if any)
Password Policy
Select Default Password Only to allow
changing the Intel AMT password from the
network interface if the default password hasn’t
been changed yet.
changing the Intel AMT password from the
network interface if the default password hasn’t
been changed yet.
OR
Select During Setup and Configuration to
allow changing the Intel AMT password from
the network interface during only setup and
configuration.
allow changing the Intel AMT password from
the network interface during only setup and
configuration.
OR
Select Anytime to allow changing the Intel AMT
password from the network interface at any
time.
password from the network interface at any
time.
Network Setup
Intel® ME Network Name Settings
Host Name
Type the host name for Intel AMT.
If you configure a set host name, ensure it
mirrors the Windows operating system’s
host name to ensure stability.
mirrors the Windows operating system’s
host name to ensure stability.
Domain Name
Type the domain name for Intel AMT.
Shared/Dedicated
FQDN
FQDN
Select Shared to use an FQDN that is shared
with the host.
with the host.
OR
Select Dedicated to use a dedicated FQDN for
Intel MEBx.
Intel MEBx.
Dynamic DNS
Update
Update
Select Enabled to enable the firmware to
actively register its IP address and FQDN on the
domain name system (DNS) using the Dynamic
DNS (DDNS) Update protocol.
actively register its IP address and FQDN on the
domain name system (DNS) using the Dynamic
DNS (DDNS) Update protocol.
OR
Select Disabled to disable this feature.
Period Update
Interval
Interval
Type the interval (in minutes) at which the
firmware DDNS Update client sends period
updates.
firmware DDNS Update client sends period
updates.
This control is only available if you enable
Dynamic DNS Update.
Dynamic DNS Update.
TTS
Type how long (in seconds) the record should
not be scavenged in DNS server.
not be scavenged in DNS server.
This control is only available if you enable
Dynamic DNS Update.
Dynamic DNS Update.
TCP/IP Settings
Wired LAN IPV4 Configuration
DHCP Mode
Select Enabled to configure TCP/IP settings by a
Dynamic Host Configuration Protocol (DHCP)
server.
Dynamic Host Configuration Protocol (DHCP)
server.
OR
Select Disabled to configure TCP/IP settings
manually.
manually.