Справочник Пользователя для Fisher & Paykel CG913

Temperature control

  Choose the control knob for the burner you want to 

use. 

  Press down gently and turn the knob anticlockwise to 

the high position. You do not need to hold the knob 
down.

  All electrodes will spark until the selected burner 

ignites. 

  Note: For the first burner selected there is a short 

delay before the safety valve allows gas to flow to the 
cooktop.

  Adjust the flame anywhere between the High and 

the Low positions. Do not adjust the flame between High and Off. 

If the cooktop does not light 

  Check that the cooktop is plugged in and the power is switched on.
  Check that the gas is turned on.
  Check that the burner parts, including the burner cap, are positioned correctly.

  Allow two seconds for the safety valve to open when igniting 

the first burner.

  A dirty or wet electrode will prevent the burner lighting 

efficiently. Clean electrodes with a toothbrush and methylated 
spirits.

High

Low

Off

Burner 
ON 
light

Correct assembly

Incorrect assembly

Electrode

Burner ring

Burner cap

Electrode

3