Справочник Пользователя для Fisher & Paykel OR60
8
Installation instructions
Anti-tilt bracket
Important!
This appliance must be restrained to prevent accidental tipping by fitting a bracket to the rear of the
appliance and securely fixing it to the wall.
appliance and securely fixing it to the wall.
To fix the anti-tilt bracket:
After you have located where the cooker is to be positioned mark, on the wall, the place where
the two screws of the anti-tilt bracket have to be fitted. Please follow the indications given in the
drawing below.
the two screws of the anti-tilt bracket have to be fitted. Please follow the indications given in the
drawing below.
Make two 8 mm diameter holes on the wall and insert the plastic plugs.
Loosely attach the anti-tilt bracket with two screws.
Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in
one slot of the cooker back.
one slot of the cooker back.
Tightly attach the anti-tilt bracket.
Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot of the
cooker back.
cooker back.
Figure 3 Fitting the anti-tilt bracket
365
235
600 mm
min 105
max 120
0
+ 15
+ 15