Справочник Пользователя для Dualit DCM1

26

Check that the small holes of your filters (17), (18) or (19)
are not  obstructed, and if necessary clean with a brush. 

Over time, a build-up of coffee grounds may be noticed at
the point where the filter holder attaches to the brewhead
(6). These can be removed with a soft brush.

The shower head and gasket (6) will periodically require 
cleaning. Small coffee granules may clog up the holes on
the shower head. 

1. Remove the drip tray (8) and ensure the water tank 

(11) is empty or has been removed.

2. Undo the screw anticlockwise in the centre of the 

shower head, the shower head and gasket will drop 
out.

3. Ease the shower head out of the gasket and clean. Use 

a brush to remove any stuburn coffee granules. 

4. Re-assemble the shower head and gasket. Ensure the 

shower head is firmly seated in the gasket. 

5. Being careful not to cross-thread, screw the shower 

head assembly to the back into the brew head. 

6. Check it is securely tightened or it will leak when you 

make your next coffee.

DCM1 instruction manual_figs out.qxp  18/04/2008  14:30  Page 26