Руководство Пользователя для Electrolux E24CM75GSS
4
Care & Cleaning
CLEANING THE oUTSIDE SURFACES
Wipe stainless steel surfaces with a damp, soft cloth soaked with mild detergent to
remove beverage stains, fingerprints, and other smudges.
remove beverage stains, fingerprints, and other smudges.
DECALCIFICATIoN INSTRUCTIoNS
The monthly decalcification and cleaning process cleans out mineral deposits in
the water and coffee delivery systems. If the mineral deposits are allowed to build
up, the coffee maker will eventually stop working properly. The decalcification
process takes about 4 minutes.
the water and coffee delivery systems. If the mineral deposits are allowed to build
up, the coffee maker will eventually stop working properly. The decalcification
process takes about 4 minutes.
What to Use
Model
Electrolux*
Part Number
Description
E24CM76GSS
ACCKITA-24
Reusable flushing cartridge
and Puly Decalcification
Powder.
E24CM75GSS and
E24CM76GSS
E24CM76GSS
ACCTKIT-24**
Puly Cleaning tablets and
Decalcification Powder
E24CM75GSS
-
Filtered Water (4 gpg
maximum water hardness...
Do NoT use distilled water
* Purchase from your Electrolux Dealer
** A starter supply is included with your unit. Use this number to reorder
CAUTIoN
The decalcification powders, tablets and solutions can damage stainless
steel surfaces. To avoid damage, rinse any surfaces that come into contact
with the decalcification powder, tablets and solutions thoroughly with a
mild solution of warm water and detergent.
CAUTIoN
To prevent damage to stainless steel surfaces, always wipe in the
direction of the grain.
direction of the grain.
Use only the cleaners indicated. Chlorine or chlorine compounds in
some cleaners are corrosive to stainless steel.
some cleaners are corrosive to stainless steel.
DO NOT use abrasives to clean stainless steel surfaces.
Never allow beverage stains, creamers or sugar to remain on stainless
steel for any length of time.
steel for any length of time.
•
•
•
•