Справочник Пользователя для Jura Capresso 13623
48
5 Maintenance
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
Non-recommended descaling agents (e.g. vinegar) may contain
substances that could damage the machine or leave residues.
substances that could damage the machine or leave residues.
T Use only original JURA descaling tablets. These are specially
formulated for your machine.
Harmful and irritating descaling agent. Harmful if swallowed. Irritat-
ing to eyes and skin.
ing to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately with plenty of
water. In case of skin irritation, seek medical advice.
T After eye contact, immediately flush eyes with plenty of water.
Remove contact lenses. Seek medical advice.
T If swallowed, rinse mouth immediately and drink large quan-
tities of water. Do not induce vomiting. Seek medical advice
immediately and show label.
immediately and show label.
If the descaling operation is interrupted, there may be damage to
the machine.
the machine.
T Allow the descaling program to run to the end.
E The descaling program lasts approximately 45 minutes.
E JURA descaling tablets are available from specialized dealers.
E If you use a CLEARYL Blue filter cartridge and this is activated,
you will not be prompted to descale.
E If the descaling agent comes into contact with sensitive sur-
faces (e.g. marble), damage cannot be ruled out. Clean up any
splashes immediately.
splashes immediately.
Example: Proceed as follows to perform descaling when prompted
to do so.
Precondition:
to do so.
Precondition:
‘Decalcify machine.’
and the c symbol are displayed.
O T Press the P button.
‘Maintenance status (1/5)’
Descaling the machine
J WARNING
J WARNING
J WARNING
NOTICE