Справочник Пользователя для CMS Products 674
HotCup Operators’ Guide
Testing
November, 2007
79
6740001
TEST THE BREWER
a. Press
, then press
until the display shows
BREW TEST
.
b. Press
to test each brewer position:
WARNING
Keep away from the brewer mechanism while it is operating.
Coming into contact with moving parts could injure you.
i.
BREW CLMPD
The brewer is in the brew position.
ii.
BREW HOME
The brewer is in the HOME position.
c. CONTINUE.
TEST VARIOUS SENSORS AND SWITCHES
a. Press
, then press
until the display shows
IN.XXXXXX
. The X's in the
display will be replaced by the following place holders:
M K P H L 1
, defined as follows:
M = mug/cup sensor (if equipped)
K = freevend keyswitch
P = waste pail switch
H = high water tank level switch
L = low water tank level switch
1/2 = ring 1/2 cup sensor switch
b. Actuate each switch or sensor to test its function. As you actuate each input, the display
element representing that switch blinks on. Releasing the switch causes that element to blink
off again, and be replaced by a dash.
off again, and be replaced by a dash.
c. CONTINUE.
RINSE ALL MIXING BOWLS
WARNING
Very hot water will be dispensed in this test. Coming into contact
with hot water is dangerous!
a. Press
, then press
until the display shows
BOWL RINSE
.
b. Press
to rinse all bowls.
RINSING
is displayed.
c. CONTINUE.