Справочник Пользователя для Zanussi DE 4554 S

5

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply 

with the installation instructions.

2. Remove all packaging from inside the appliance.

3. Set the water softener.

4. Pour 1 litre of water inside the salt container and then fill 

with salt.

5. Fill the rinse aid dispenser.

The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using
the water hardness switch and electronically, using the function
push buttons on the control panel.

(The dishwasher must be switched off)

1. Press function push buttons 1 and 2 simultaneously.

2. While keeping the function push buttons 1 and 2 pressed 

switch on the dishwasher by pressing the On/Off push 
button. 
The On/Off indicator light comes on. 
At the same time, the indicator lights of function push 
buttons 1 and 2 start flashing. 

3. Press function push button 1, the indicator light of function 

push button 2 turns off, while the indicator light of function 
push button 1 remains fixed for about 5 seconds, after this it 
starts flashing indicating the current level of the water 
softener.
The current level is indicated by the number of flashes 
made by the indicator light of function push button 1, that 
alternates 5 seconds off with a number of flashes, this for 
about 60 seconds.

Example:
1 flash

= level 1

2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5

4. To change the level, press function push button 1. Each 

time the push button is pressed the level changes.

Examples:
if the current level is 3, by pressing function push button 1
once, level 4 is selected.
if the current level is 5, by pressing function push button 1
once, level 1 is selected.

The indicator light of function push button 1 remains off for 
about 5 seconds after which it starts flashing indicating the 
new level selected.

5. To memorise the new level, switch off the dishwasher by 

pressing the On/Off push button.

PPM

(parts per

million)

French

degrees

(°TH)

Clarke

degrees

50 - 63

36 - 49

22 - 35

6 - 21

< 6

71 - 90

51 - 70

31 - 50

8 - 30

< 8

701 - 900

501 - 700

301 - 500

80 - 300

< 80

5

4

3

2

1

yes

yes

yes

yes

no