Справочник Пользователя для 3M 800a3
12
2011 September
800a3-NA
4-SPECIFICATIONS
1. Power Requirements
Electrical: 115 Volt, 60Hz, 3.8 A (220 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
Contact your 3M Representative for power requirements not listed above.
2. Operating Rate
Belt speed is 0.5m/s [100 ft/min].
IMPORTANT SAFEGUARD
5. Tape Width
50mm [2 inch] minimum to 75mm [3 inch] maximum
4. Tape
Scotch
®
pressure-sensitive fi lm box sealing tapes.
3. Operating Conditions
Use in dry, relatively clean environments at 5
o
C to 50
o
C [40
o
F to 120
o
F] with clean, dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.
•
To reduce the risk associated with fire
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
WARNING
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (455mm) apart minimum.
Boxes must be 18 inches (455mm) apart minimum.