Справочник Пользователя для Sony Countertop Computer

Скачать
Страница из 64
Notes on Use
49
Notes on Use
The information in this section provides basic procedures to follow when 
handling your computer, components, and accessories.
The power source
Your computer operates on 100–120 V AC 50/60 Hz only. 
Plug all the power cords for your computer and its peripheral equipment into 
the same AC supply line. AC derived from different supply lines may result 
in voltage differences that can cause unstable operation or unwanted weak 
currents at the time of connection.
Do not share the AC outlet with any other power-consuming equipment, 
such as copying machines or shredders.
You can purchase a power strip with a surge protector. This device prevents 
damage to your computer caused by sudden power surges such as those that 
may occur during an electrical storm.
If you live in an area that experiences frequent power fluctuations, you may 
want to purchase an Uninterruptible Power Supply (UPS). This device 
contains both a surge protector and a battery backup. The surge protector 
prevents damage to your computer caused by power surges. The battery 
backup safeguards your data during a brief period of power loss.
The power control button on the front panel does not turn off the system AC 
power. To remove power from the system, you must turn off the computer 
and then unplug the AC power cord from the wall outlet or power strip.
Do not place heavy objects on the power cord.
Do not operate the system with the cover removed. Always reinstall the 
cover before turning on the system.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
Unplug your computer from the wall outlet if you will not be using the 
computer for a long time.
Before touching anything inside the computer, turn the system off and let it 
cool for ten minutes. This will ensure that the processor heat sink will not be 
hot. 
Do not attempt to open the power supply. There are no user-serviceable parts 
in the power supply. To avoid personal injury or damage to your equipment, 
refer the repair or replacement of the power supply to qualified personnel 
only.