Справочник Пользователя для Liebherr 7083-103-00

2

• Avoid positioning the appliance in direct sunlight or near cook-

ers, radiators and similar sources of heat.

• The floor on which the appliance stands should be horizontal

and level.

• The ventilation grilles should not be obstructed. Always ensure

that there is good ventilation and that the outward flowing air is

able to escape.

• Standard EN 378 specifies that the room in which you install

your appliance must have a volume of 1 m³ per 8 g of R 600a

refrigerant used in the appliance, so as to avoid the formation of

inflammable gas/air mixtures in the room where the appliance

is located in the event of a leak in the refrigerant circuit. The

quantity of refrigerant used in your appliance is indicated on

the type plate on the inside of the appliance.

The required air flow is directed through the plinth.

It is important to use the provided ventilation grille for the ventila-

tion opening.

Only operate the appliance with alternating current (AC).

The  permissible  voltage  and  frequency  are  indicated  on  the

type plate.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Do not connect the appliance using an exten-

sion cable or extension socket.
Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!