Справочник Пользователя для Barco K5960008-03

52 __________________________________________________________Barco - DCMS - User Manual

Verification

The verification table below lists an example output of a verification table. After

the calibration process, the user can start a verification of the results by pressing

the ‘Start verification’ button in the calibration dialog. The layout of this table is

always the same but the content may depend on the type of display that is

calibrated. The example below is taken after calibration of a Barco MDPW476.

Table 2: Verification table

Verification is done by measuring the color and luminance of a set of gray levels,

including white. The measured results are compared to the calculated theoretical

values and printed on screen.