Справочник Пользователя для Bentley 2006

Скачать
Страница из 702
 
STAAD Commands and Input Instructions 
 Section 5
 
5-308
 
Description 
See Sections 
1.18.3, 5.30, 
and 5.34 of 
STAAD 
Technical 
Reference 
Manual
 
This command should appear as part of a loading specification. If 
it is the first occurrence, it should be accompanied by the load data 
to be used for frequency and mode shape calculations. Additional 
occurrences need no additional information. Maximum response 
spectrum load cases allowed in one run is 4. 
 
Results of frequency and mode shape calculations may vary 
significantly depending upon the mass modeling. All masses that 
are capable of moving should be modeled as loads, applied in all 
possible directions of movement. For dynamic mass modeling, see 
sections 5.32 and 1.18.3 of STAAD Technical Reference Manual. 
An illustration of mass modeling is available, with explanatory 
comments, in Example Problem No.11_EC8. 
Example 
 
LOAD 2 SPECTRUM IN X-DIRECTION 
SELFWEIGHT X 1.0 
SELFWEIGHT Y 1.0 
SELFWEIGHT Z 1.0 
JOINT LOAD 
10 FX 17.5 
10 FY 17.5 
10 FZ 17.5 
MEMBER LOADS 
5 CON GX 5.0 6.0 
5 CON GY 5.0 6.0 
5 CON GX 7.5 10.0 
5 CON GY 7.5 10.0 
5 CON GX 5.0 14.0 
5 CON GY 5.0 14.0 
SPECTRUM SRSS EURO ELASTIC X 1 ACC DAMP 
0.05 – 
LIN MIS 0 ZPA 40 
SOIL TYPE A ALPHA 2 Q 1.5