Справочник Пользователя для Vulcan-Hart GRC45F ML-12

– 26 –

Timers 

  through  

 :

1. Press  

  and enter the program mode. PROGRAM is displayed in the window.

2. Press  

  . The LED's on timers  

  through  

  are lit and SELECT PRODUCT is displayed

in the window.

3. To select a timer, press one of the lit timer numbers; CK# 00:00 and TIME are displayed in the

window.

4. Enter the desired time using keys  

  through  

 . The time is displayed in the window. After

entering the time, press  

 ; SELECT PRODUCT is displayed in the window and the LED's

on timers  

  through  

 are lit.

5. Repeat steps 3 and 4 to program the remaining timers or press 

 

 to exit the program

completely.

Each timer has additional timing functions that can be programmed to fit your particular operation.

• DUTY TIME -  Notifies the operator during a fry cycle to perform a particular task (shake a

basket, flip a product, etc.). When the remaining cook time is the same as the Duty time, a
beeper sounds and DUTY # displays in the window. Press the flashing timer number to silence
the beeper. The beeper cancels after 5 seconds if not silenced.

• HOLD TIME -  Starts after the initial timer beeper is silenced; HD# XX:XX is displayed in the

window. After timing out, a beeper sounds. Press the flashing timer number to silence the
beeper. The beeper cancels after 5 seconds if not silenced.

• COMPENSATED TIME - Automatically adjusts the time for variations in load sizes.

• STRAIGHT TIME - Does not adjust time for variations; used for regular timing operations.