Справочник Пользователя для Vulcan-Hart ML-135503

– 3 –

This service manual was written for:

GHF91G Gas Fryers and GHF90G Gas Frymates.

Generally, installations are made by the dealer or
contracted by the dealer or owner. Detailed installation
instructions are included in the Installation and
Operation Manual, which is sent with each fryer.

Filtering instructions are included in the Installation
and Operation Manual.

Detailed operation instructions are included with each
fryer in the Installation and Operation Manual.

Detailed cleaning procedures are included in the
Installation and Operation Manual.

1. Turn thermostat OFF.

2. Push combination valve knob in and turn to

OFF.

3. Wait 5 minutes for unburned gas to vent.

4. Push combination valve knob in and turn to

PILOT.

5. While holding the combination valve knob in,

light the pilot with a lit taper. Hold the
combination valve knob in for approximately
30 seconds before releasing.

4

120,000

0

0

NOTE:  If pilot does not remain lit, repeat steps 2
through 5, but allow a longer period of time before
releasing the combination valve knob. Adjust pilot
flame, if necessary, as outlined under Pilot Adjustment
in Service Procedures and Adjustments.

6. Turn combination valve knob to ON.

• Hand tools (standard set)

• VOM with AC current tester (any quality VOM

with a sensitivity of at least 20,000 ohms per
volt can be used)

• Gas test kit

• Temperature tester (thermocouple type)

• Manometer