Справочник Пользователя для Vulcan-Hart ML-135503

– 7 –

6. Remove thermopile from pilot bracket.

7. Reverse procedure to install.

WARNING:  SHUT OFF THE GAS BEFORE
SERVICING.

WARNING: ALL GAS JOINTS DISTURBED DURING
SERVICING MUST BE CHECKED  FOR LEAKS.
CHECK WITH SOAP AND WATER SOLUTION
(BUBBLES). DO NOT USE AN OPEN FLAME.

1. Remove pilot assembly from fryer as outlined

under thermopile.

2. Remove hex nut on the bottom of the pilot to

expose the orifice.

3. Replace orifice and reverse procedure to

assemble.

2. Remove the right hand burners as outlined

under Burners (optional).

3. Disconnect lead wires from combination valve

and mark for reconnecting.

4. Disconnect pilot tubing from combination

valve.

5. Disconnect combination valve union (Fig.1)

and pressure fitting (Fig. 2).

                  

6. Remove the combination valve from the fryer.

7. Reverse procedure to install.

WARNING:  SHUT OFF THE GAS BEFORE
SERVICING.

WARNING:  ALL GAS JOINTS DISTURBED
DURING SERVICING MUST BE CHECKED  FOR
LEAKS. CHECK WITH SOAP AND WATER
SOLUTION (BUBBLES). DO NOT USE AN OPEN
FLAME.

1. Disconnect fryer from main gas supply.