Справочник Пользователя для Mitsubishi Electronics SW1-GTD2-O-E

5 - 21

5.2.5 Installing OS

Point

(1) Data installed in the GOT

When the OS is installed, the monitor data and special data in the GOT are

deleted.

If the data must be retained, upload them in advance.

(2) During installation of OS

The OS installation, it can be interrupted. (Reinstallation of the OS is required.)

Do not turn OFF the power of the GOT/PC or unplug the communication cable.

Otherwise, the GOT may became inoperable.

If the GOT goes down due to the operation above, install the system program

again by the following procedure:

Remove the communication module/board or optional module mounted

on the GOT (remove the communication cable for the communication

interface built-in GOT) before installation.

Turn OFF the GOT.

Turn ON the GOT while pressing two locations shown below on the

GOT at the

same time.

Message "Reinstall the ROM_BIOS/OS" appears on the GOT.

Complete installation according to the GOT instruction.