Справочник Пользователя для Mitsubishi Electronics SW1-GTD2-O-E

5 - 28

5.3.1 Installing ROM_BIOS

Point

(1) Using PC card

Do not put other data in the PC card which is used to install the ROM_BIOS.

All other data are deleted when the ROM_BIOS is installed.

(2) Installing ROM_BIOS

The ROM_BIOS installation, it cannot be interrupted.

Do not turn OFF the power of the GOT/PC or unplug the communication cable.

Otherwise, the GOT may become inoperable.

If the GOT is inoperable due to the operation above, install the system program

again with the procedure below:

Remove the communication module/board or optional module mounted on

the GOT (remove the communication cable for the communication interface

built-in GOT) before installation.

Turn OFF the GOT.

Turn ON the GOT while pressing two locations shown below on the GOT at

the sametime.

Message "Reinstall the ROM_BIOS/OS" appears on the GOT.

Complete installation according to the GOT instruction.

If the GOT is not recovered with the above method, contact your local

Mitsubishi service center or representaive.