Справочник Пользователя для Mitsubishi Electronics SW1-GTD2-O-E
App - 5
App - 5
Appendix 3 Using Existing Data
Appendix 3.1 Outline procedures
The outline procedures for converting the existing data to the GT Designer2 data are shown below.
Monitor data for A64GOT
Monitor data for A77GOT
Monitor data created by
GT Designer or DU/WIN
GT Designer or DU/WIN
Monitor data for GOT800 Series
Digital's Package Data
The monitor data of the A64GOT/A77GOT are
read out and saved as monitor data of the
GOT800 Series.
read out and saved as monitor data of the
GOT800 Series.
SW3NIW-A8GOTP
(Drawing software for GOT800 Series)
The monitor data of the GOT800 Series or the
Digital's package data are converted to the monitor
data of the GT Designer.
Digital's package data are converted to the monitor
data of the GT Designer.
GT Converter
SW3NIW-A8GOT Graphic Settings
Software Package Operating Manual
(Monitor Screen Creation Manual)
Software Package Operating Manual
(Monitor Screen Creation Manual)
Help function of GT Converter
GT Designer2
The monitor data of the GT Designer or DU/WIN are read out with the GT Designer2.
The read data is saved as the GT Designer2 data.
(It cannot be saved as the GT Designer or DU/WIN format file.)
Refer to the following for reading or saving method.
The read data is saved as the GT Designer2 data.
(It cannot be saved as the GT Designer or DU/WIN format file.)
Refer to the following for reading or saving method.
Section 4.3.1 Opening project
Section 4.13.2 Saving as project name
<It is contained in the CD-ROM of the GT Designer2.>