Справочник Пользователя для Mitsubishi Electronics sw1dnd-iqwk-e
3 - 48
3.7.2 Checking power supply capacity and I/O points
3 OPERATING PROCEDURE OF MELSOFT NAVIGATOR
iQ Works
3.7.2
Checking power supply capacity and I/O points
Check power supply capacity and I/O points of created system configuration.
This functions is not supported by FXCPU.
This functions is not supported by FXCPU.
1.
Select [Workspace]
⇒ [Check] ⇒
[Power Supply Capacity and I/O Points
of Q/L Module Configuration] in the
menu bar.
of Q/L Module Configuration] in the
menu bar.
2.
The message shown on the left is
displayed.
displayed.
Read the message and click the
button to display the "Result of Power
Supply Capacity and I/O Points Check"
window.
Supply Capacity and I/O Points Check"
window.
3.
Check for errors in the check result.
When an error exists in the check result
(items displayed in red), options of modules
for re-selection are displayed by clicking
"Total Output Current" or "Total I/O Points".
A message is displayed by clicking "Total
Voltage Drop".
Read the message and correct the module
configurations.
(items displayed in red), options of modules
for re-selection are displayed by clicking
"Total Output Current" or "Total I/O Points".
A message is displayed by clicking "Total
Voltage Drop".
Read the message and correct the module
configurations.
● "Total Output Current"
Values displayed under "Total Output Current" may be different from the total output current of module with latest
version.
For the total output current of module with latest version, check the latest manuals of each module.
version.
For the total output current of module with latest version, check the latest manuals of each module.
Select