Справочник Пользователя для Liebherr 120713 7082694 - 01

u

Place  the  cold  storage  accu-

mulators  in  the  top  freezer

compartment to save space.

u

Place  the  frozen  cold  storage

accumulators  on  the  frozen

food in the upper front area of

the freezer compartment.

The IceMaker is in the fourth drawer from the top. The drawer

is marked "IceMaker".
Make certain that the following conditions are met:

-

The appliance is level.

-

The appliance is connected.

-

The IceMaker is connected to the water supply.

Fig. 6 

u

Pull out the drawer.

u

Press the On/Off button

 Fig. 6 (1)

 so that the LED

 Fig. 6 (2)

shines.

u

Push in the drawer.

u

The IceMaker produces ice cubes only if the drawer is fully

closed.

The production capacity depends on the freezer temperature.

The  lower  the  temperature,  the  more  ice  cubes  can  be

produced in a specific period.
The ice cubes drop from the IceMaker into the drawer. When a

certain filling level has been reached, no further ice cubes are

produced. The IceMaker does not fill the drawer right up to the

brim.
If  large  quantities  of  ice  cubes  are  needed,  the  complete

IceMaker  drawer  can  be  exchanged  for  the  adjacent  drawer.

When  the  drawer  is  closed,  the  IceMaker  automatically  re-

commences production.
Once  the  IceMaker  has  been  switched  on  for  the  first  time,  it

may take up to 24 hours until the first ice cubes are produced.

When the appliance is used for the first time and if it has been

out of use for a long time, particles may collect in the IceMaker

and/or water conduit.

u

Therefore do not use or consume the ice cubes made in the

first 24 hours.

When  the  IceMaker  is  switched  off,  the  IceMaker  drawer  can

also be used for freezing and storing food.

u

Press  the  On/Off  button  for  about  1  second  until  the  LED

goes out.

u

Clean the IceMaker.

w

This ensures that no water or ice remains in the IceMaker.

The NoFrost system automatically defrosts the appliance.
The  moisture  condenses  on  the  evaporator,  is  periodically

defrosted and evaporates.

u

The appliance does not have to be manually defrosted.

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Please  do  not  use  any  aggressive,  scouring,  sand-,

chloride-, chemical- or acid-based cleaning agents.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do  not  pull  off,  bend  or  damage  cables  or  other  compo-

nents.

u

Do not allow any cleaning water to enter the drain channel,

ventilation grille or electrical parts.

u

Please  use  soft  cleaning  cloths  and  a  universal  pH-neutral

cleaning agent.

u

Please use cleaning and care products suitable for contact

with foodstuffs in the appliance interior.

u

u

u

Clean  plastic  outer  and  inner  surfaces  with  lukewarm

water and a little washing-up liquid.

u

Clean  items  of  equipment  by  hand  with  lukewarm  water

and a little washing-up liquid.

u

Only  use  a  damp  cloth  to  clean  the  telescopic  rails.  The

grease  in  the  runners  is  for  lubrication  purposes  and  must

not be removed.

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

When the temperature is sufficiently cold:

u

Put the food back inside.

Fig. 7 

The IceMaker has to be switched on.

u

Pull out the drawer and remove the ice cubes.

u

Clean  the  drawer  with  warm  water  and  mild  washing-up

liquid.