Справочник Пользователя для Frymaster 8196321

Скачать
Страница из 66
 
 
NOTICE 
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS 
EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY 
FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE 
PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL 
BE VOID.  FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY 
CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR 
INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART 
AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER. 
 
 DANGER 
Copper wire suitable for at least 167°F (75°C) must be used for power connections. 
 
 DANGER 
The electrical power supply for this appliance must be the same as indicated on the 
rating and serial number plate located on the inside of the fryer door. 
 
 DANGER 
This appliance must be connected to the voltage and phase as specified on the rating 
and serial number plate located on the inside of the fryer door. 
 
 
DANGER 
All wiring connections for this appliance must be made in accordance with the wiring 
diagrams furnished with the equipment.  Wiring diagrams are located on the inside of 
the fryer door. 
 
 
DANGER 
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this 
or any other appliance. 
 
 WARNING 
Do not attach accessories to this fryer unless fryer is secured from tipping. Personal 
injury may result. 
 
 WARNING 
Frymaster fryers equipped with legs are for permanent installations.  Fryers fitted with 
legs must be lifted during movement to avoid damage and possible bodily injury. For a 
moveable or portable installation, Frymaster optional equipment casters must be used. 
Questions? Call 1-800-551-8633 
 
 WARNING
 
Do not use water jets to clean this equipment. 
 
 DANGER 
All wiring connections for this appliance must be made in accordance with the wiring 
diagrams furnished with the equipment.  Wiring diagrams are located on the inside of 
the fryer door. 
 
 
WARNING
 
This equipment is intended for indoor use only.  Do not install or operate this 
equipment in outdoor areas.