Справочник Пользователя для Hoshizaki C-100BAF-ADDS

20

[1] The icemaker will not 

start.

a) Power Supply

1. Off, blown fuse, or 

tripped breaker.

1. Turn on, replace, or reset.

2. Power cord 

unplugged.

2. Plug into outlet.

3. Loose connection.

3. Tighten.

4. Bad contacts.

4. Check for continuity and 

replace.

5. Not within 

specifications.

5. Refer to nameplate and 

correct.

b) Power Switch 

(Control Box)

1. "OFF" position.

1. Move to "ON" position.

2. Bad contacts.

2. Check for continuity and 

replace.

c) Suction Temperature 

Safety 
(Low Water/Freeze-Up 
Safety)

1. Open due to water 

supply cut-off.

1. Check water supply, 

water filters, water inlet 
strainer-washer, float, and 
water valve.

2. Open due to 

evaporator freeze-up 
(gear motor not 
operating).

2. Check gear motor 

operation.

3. Bad contacts.

3. Check for continuity and 

replace.

d) Bin Control Thermostat 

Assembly (with 
integrated heater)

1. Open with bin filled 

with ice.

1. Remove ice.

2. Ambient temperature 

too cool.

2. Increase ambient 

temperature.

3. Bulb out of position.

3. Place in position.

4. Bad contacts.

4. Check for continuity 

and replace. See 
"V.F. Removal and 
Replacement of Bin 
Control Thermostat 
Assembly." 

5. Bad thermostat 

heater.

5. Check and replace. 

See "V.F. Removal 
and Replacement of 
Bin Control Thermostat 
Assembly." 

e) Gear Motor Protector 

(External Overload) 
(2.4~3.0A)

1. Tripped.

1. Press switch on control 

box to reset. Check 
supply voltage, gear 
motor amperage, gear 
motor bearings, and 
auger bearings (see 
"V.C.1. Upper Bearing 
Wear Check"). Check for 
evaporator freeze-up.