Справочник Пользователя для National Instruments 321645c-01
Chapter 2
Function Reference — MIO_Config
NI-DAQ FRM for PC Compatibles
2-284
©
National Instruments Corporation
MIO_Config
Format
status = MIO_Config (deviceNumber, dither, useAMUX)
Purpose
Turns dithering (the addition of Gaussian noise to the analog input signal) on and off, for an
E Series device except the AT-MIO-16F-5, AT-MIO-64F-5, PCI-6110E, PCI-6111E, and Lab
and 1200 Series devices (except the Lab-PC+). This function also lets you specify whether to
use AMUX-64T channels or onboard channels for devices with 64 channels.
E Series device except the AT-MIO-16F-5, AT-MIO-64F-5, PCI-6110E, PCI-6111E, and Lab
and 1200 Series devices (except the Lab-PC+). This function also lets you specify whether to
use AMUX-64T channels or onboard channels for devices with 64 channels.
Parameters
Input
Parameter Discussion
dither indicates whether to add approximately 0.5 LSB rms of white Gaussian noise to the
input signal. This is useful for applications that involve averaging to increase the effective
resolution of a device. For high-speed applications that do not involve averaging, dithering is
not recommended and should be disabled.
input signal. This is useful for applications that involve averaging to increase the effective
resolution of a device. For high-speed applications that do not involve averaging, dithering is
not recommended and should be disabled.
0:
Disable dithering.
1:
Enable dithering.
This parameter is ignored for the 16-bit E Series devices. Dithering is always enabled on these
devices.
devices.
useAMUX is valid for the devices with 64 channels only.
1:
To use AMUX-64T channels.
0:
To use onboard channels.
Name
Type
Description
deviceNumber
i16
assigned by configuration utility
dither
i16
whether to add approximately 0.5 LSB rms of
white Gaussian noise to the input signal
white Gaussian noise to the input signal
useAMUX
i16
whether to use AMUX-64T input channels or
onboard channels for 64 channel devices
onboard channels for 64 channel devices