Справочник Пользователя для Sterling Power Products 1250CED
4 STEP CHARGE
STEP 1 – BOOST: During this period, the charger delivers a maximal current and the voltage increases progressively to
reach 14.4V or 14.8V (2425CED: 28.8V or 29.6V) according to the battery type. This step is depending of the initial status
of your batteries. The red-Orange L.E.D. will be on during this phase.
STEP 2 – ABSORPTION: Adjustable period where the voltage is kept at its maximum and the current decreases in order to
optimize the battery charge. During this phase the yellow L.E.D. will come on.
STEP 3 – FLOAT: The voltage is kept at a level of 13.6V (2425CED: 27.2V) in order to maintain the charge without
increasing the temperature of the batteries. They can be left connected without any damage. Only the bottom green L.E.D.
is on. - POWERPACK: Full current is available for on-board supply.
STEP 4 – RESET: If the battery voltage goes down below 11.5V (2425CED: 23.0V), the charge cycle starts all over again
with step 1.
STEP 1 – BOOST: During this period, the charger delivers a maximal current and the voltage increases progressively to
reach 14.4V or 14.8V (2425CED: 28.8V or 29.6V) according to the battery type. This step is depending of the initial status
of your batteries. The red-Orange L.E.D. will be on during this phase.
STEP 2 – ABSORPTION: Adjustable period where the voltage is kept at its maximum and the current decreases in order to
optimize the battery charge. During this phase the yellow L.E.D. will come on.
STEP 3 – FLOAT: The voltage is kept at a level of 13.6V (2425CED: 27.2V) in order to maintain the charge without
increasing the temperature of the batteries. They can be left connected without any damage. Only the bottom green L.E.D.
is on. - POWERPACK: Full current is available for on-board supply.
STEP 4 – RESET: If the battery voltage goes down below 11.5V (2425CED: 23.0V), the charge cycle starts all over again
with step 1.
1 : Battery type : Ensure that the colour of the L.E.D. is in accordance with the battery type selected.
2 : Overvoltage: The red light indicates an overvoltage due to an overcharging (from solar panels for
example).
3 : High charger temperature: The L.E.D. becomes yellow and the charger stops when the
temperature is too high. Ensure that the fan is working. The charger will restart at a lower
temperature.
4 : High battery temperature: The charger switches off if the battery temperature reaches 50 °C.
Investigate your batteries and their water level. Restart your charger only if you are sure all is OK.
5 : Constant current : The L.E.D. is orange when there is a constant current from the charger to the
batteries.
6 : The L.E.D. becomes yellow when the voltage reaches 14.0V (2425CED: 28.0V). The charger is in
step 2: absorption
7 : Float /powerpack : The L.E.D. indicates that the charger is in step 3.
2 : Overvoltage: The red light indicates an overvoltage due to an overcharging (from solar panels for
example).
3 : High charger temperature: The L.E.D. becomes yellow and the charger stops when the
temperature is too high. Ensure that the fan is working. The charger will restart at a lower
temperature.
4 : High battery temperature: The charger switches off if the battery temperature reaches 50 °C.
Investigate your batteries and their water level. Restart your charger only if you are sure all is OK.
5 : Constant current : The L.E.D. is orange when there is a constant current from the charger to the
batteries.
6 : The L.E.D. becomes yellow when the voltage reaches 14.0V (2425CED: 28.0V). The charger is in
step 2: absorption
7 : Float /powerpack : The L.E.D. indicates that the charger is in step 3.
STEP
1
STEP
2
STEP
3
variable
FEATURES
Input voltage: AC 80V-130V and 170V-280V
Input voltage: AC 80V-130V and 170V-280V
Output short protection: Yes
Input frequency: 40Hz-400 Hz
Battery reverse polarity protection: Yes, by fuse.
Charge:DC 14.4V or 14.8V
Thermal protection: Yes
(2425CED: 28.8V or 29.6V)
Overload protection : Yes
Output current: 1230CED: 30A max.
1240CED: 40A max.
1250CED: 50A max.
2425CED: 25A max.
1250CED: 50A max.
2425CED: 25A max.
Efficiency > 85 %
DIMENSIONS
Length: 340mm
Width: 180mm
Height: 90mm
Weight: 3.3kgs
Length: 340mm
Width: 180mm
Height: 90mm
Weight: 3.3kgs