Справочник Пользователя для Panasonic KX-TD816
Station Features and Operation (DPT/SLT)
144
User Manual
<PT>
•
The destination extension shows the Caller ID and the extension number from where the
call was transferred on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
call was transferred on the display.
<Example> The Caller ID number "123456789" is transferred from extension 101.
The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and
number are displayed.
You can change the display to show the original extension number and name by System
Programming.
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and
number are displayed.
You can change the display to show the original extension number and name by System
Programming.
•
A flexible CO button can be assigned as a DSS button.
•
To use "One-Touch Transfer", System Programming is required.
•
Pressing the FLASH or FLASH/RCL button while dialing clears the display. Then you
can enter the revised number.
can enter the revised number.
•
If you want to return to the held call, press the TRANSFER button or corresponding CO,
INTERCOM button before the destination extension answers.
INTERCOM button before the destination extension answers.
•
When "Transfer Recall" occurs, the display shows:
<Example>
<Example>
<SLT>
•
If you want to return to the held call, flash the hookswitch before the destination
extension answers.
extension answers.
<ISDN Telephone>
•
This feature is not available for ISDN telephones.
Programming Guide References
[108] Automatic Hold by CO / DSS Button
[201] Transfer Recall Time
[990] System Additional Information
User Manual References
101 123456789
RCL: Ext 103