Справочник Пользователя для Vermont Casting LHER20

26

1.  Remove the upper and lower trims.
2.  Remove the doors and mesh firescreen, if installed.
3.  Remove the bottom door rail. (Fig. 28)
4.  Disconnect the gas supply from the control valve un-

der the fireplace. Remove the two (2) screws located 
at bottom rear of burner pan. Disconnect the primary 
spill switch from the gas valve. Leave the primary 
spill switch in its location, as it must be rewired to 
complete the new burner assembly installation. Lift 
the complete burner assembly up and out of unit to 
clear support ledge. (Fig. 29) Remove the existing 
fan assembly, if installed.

5.  Remove the hood and inner baffle. (Fig. 30)
6.  Install the LHEC20/LHER20 insert by pushing it all 

the way back inside the shell. (Fig. 31) For complete 
gas line and venting installation, refer to Pages 6 
and 8.

FP1506

EP28-5 

remove bottom door rail

6/17/04  djt

FP1506

Fig. 28  Remove the bottom door rail.

FP1507

EP28-5 

remove old burner

6/17/04  djt

FP1507

Fig. 29  Remove the old burner assembly.

FP1508

EP28-5 

remove inner baffle

and hood 

 6/17/04  djt

FP1508

Hood

Inner 

Baffle

Fig. 30  Remove the decorative burner hood and inner baffle.

FP1523

insert in 

EP28

6/04

LHEC20 

or 

LHER20 

Insert

EP28-5 

Series 

Fireplace

FP1523

Fig. 31  Install insert by pushing it all the way inside the shell.