Справочник Пользователя для GE ZVC36

Design Information
Product Clearances ..........................................................................4
Product Dimensions ....................................................................5–8
Advance Planning
Advance Planning  ............................................................................9

Power Supply ......................................................................................9
Duct Fittings  .................................................................................... 10
Installation Preparation 
Tools and Materials Required ....................................................11
Remove the Packaging ................................................................11
Parts Provided ..................................................................................12
Ductwork, Wiring Locations ......................................................13
Construct Ceiling Support ..........................................................14
Remote Mounting of the Control – Wired ....................15, 16

Installation Instructions
Step 1, Install Hood Liner ............................................................17
Step 2, Connect Electrical............................................................18
Step 3, Install Insert Sleeve ........................................................19
Step 4, Install Damper Plate ......................................................20
Step 5, Install Blower Motor........................................................21
Step 6, Connect Wiring Harness ..............................................21
Step 7, Install Filters ......................................................................22
Step 8, Finalize Installation ........................................................22

The vent hood and liner assembly must be installed
30

″

minimum and 36

″

maximum above the cooking

surface. 

•Always refer to the cooktop or range installation

instructions for product-specific clearances.

NOTE: Installation height should be measured 
from the cooking surface to the bottom edge 
of the metal hood liner or cabinet surface.
NOTE: UL requires any combustible surface to be 
a minimum of 30

″

above the cooking surface.

•This hood must be vented to the outdoors.

•This hood may be mounted onto a wall or installed

over an island.

•This hood can be installed over any Monogram

electric/gas cooktop or Monogram Professional
cooktop or range of equivalent width.

*30

″ 

Minimum required

*36

″ 

Maximum recommended

36

″ 

min.

*NOTE: Rear wall exhaust venting may affect

installation height. See page 13.