Справочник Пользователя для HP (Hewlett-Packard) 4100N

126 Chapter  4 - Problem solving

EN

The following table lists the disk mopy (multiple original copy) error 
numbers reported on either the Printer Collation or Job Storage Disk 
Error page, which is printed when an error exists. Use the 
HP Resource Manager for management of the disk (see “HP 
Resource Manager”on page 37).

1

Disk volume not present – it 
may be uninitialized.

• Hard disk: Initialize the hard disk accessory. 

If problem persists, replace the hard drive.

• RAM disk: Turn the printer off and then on 

again.

3

A file or directory asked for 
could not be found.

• Possible data corruption. Delete the job that 

prompted the error.

5

Invalid # of bytes given in a 
read/write request.

• Possible data corruption. Delete the job that 

prompted the error.

6

Attempt to create a file or 
directory that already exists.

• The user has sent a username that is the 

same as an existing directory. Change the 
username in the driver and resend the job.

15

Bad Disk

• Hard disk: Initialize the hard disk accessory. 

If problem persists, replace the hard drive.

16

No volume label

• Hard disk: Initialize the hard disk accessory. 

If problem persists, replace the hard drive.

23

Bad seek request – the 
resulting offset would be 
negative.

• Possible data corruption. Delete the job that 

prompted the error.

24

Unexpected internal error

• Possible data corruption, delete the job the 

error occurred with.

• Disk media problem – initialize the hard disk 

accessory or reboot to reinit the RAM disk.

• If the problem persists on a hard drive, 

replace the hard drive.