Справочник Пользователя для HP (Hewlett-Packard) 4100N
EN
Correcting output quality problems 131
Dropouts
1
Make sure that the environmental specifications for the printer are
being met (see “General specifications” on page 202).
being met (see “General specifications” on page 202).
2
If the paper is rough and the toner easily rubs off, either try
changing the fuser mode to High 1 or High 2 (see “Paper
Handling Menu” on page 210), or try using a smoother paper.
changing the fuser mode to High 1 or High 2 (see “Paper
Handling Menu” on page 210), or try using a smoother paper.
3
Try changing to a different paper type.
Lines
1
Print a few more pages to see if the problem corrects itself.
2
Clean the inside of the printer (see “Cleaning the printer”
on page 88) and run a manual cleaning page to clean the fuser
(see “Running the cleaning page manually” on page 91).
on page 88) and run a manual cleaning page to clean the fuser
(see “Running the cleaning page manually” on page 91).
3
Replace the toner cartridge.
4
Maintenance might be due. Check this by printing a copy of the
supplies status page (see “Supplies status page” on page 154). If
maintenance is due, order and install the printer maintenance kit
(see “Performing preventative maintenance” on page 93).
supplies status page (see “Supplies status page” on page 154). If
maintenance is due, order and install the printer maintenance kit
(see “Performing preventative maintenance” on page 93).