Справочник Пользователя для HP (Hewlett-Packard) 4100N

196 Appendix A - Specifications

EN

To avoid damaging the printer, use only labels recommended for use 
in laser printers.

If you have problems printing labels, use tray 1 and open the rear output 
bin.

Do not print on the same sheet of labels more than once—peeling and 
adhesive contamination might result.

When selecting labels, consider the quality of each component:

●

Adhesives: The adhesive material should be stable at 230° C 
(446° F), the printer’s maximum temperature. 

●

Arrangement: Only use labels with no exposed backing between 
them. Labels can peel off sheets with spaces between the labels, 
causing serious jams.

●

Curl: Prior to printing, labels must lie flat with no more than 
13 mm (0.5 in) of curl in any direction. 

●

Condition: Do not use labels with wrinkles, bubbles, or other 
indications of separation. 

To print sheets of labels, see “Printing labels” on page 61.

Transparencies used in the printer must be able to withstand 230° C 
(446° F), the printer’s maximum temperature. Close the rear output 
bin to print transparencies to the top output bin.

If you have problems printing transparencies, use tray 1. Be sure to 
remove each transparency from the output tray to keep them from 
sticking together.

To avoid damaging the printer, use only transparencies recommended 
for use in laser printers.

To print transparencies, see “Printing transparencies” on page 62.