Справочник Пользователя для HP (Hewlett-Packard) 4100N

232 Appendix C - Printer memory and expansion

EN

Follow this procedure to verify that DIMMs are installed correctly:

Check that the printer control panel displays 

READY

 when the 

printer is turned on. If an error message appears, a DIMM might 
have been incorrectly installed. Check the printer messages (see 
“Understanding printer messages” on page 111).

Print a new configuration page (see “Configuration page” on 
page 152).

Check the memory section on the configuration page and 
compare it to the configuration page printed before the DIMM 
installation. If the amount of memory has not increased, the 
DIMM might not be installed correctly (repeat the installation 
procedure) or the DIMM might be defective (try a new DIMM).

If you installed a printer language (personality), check the Installed 
Personalities and Options section on the configuration page. This area 
should list the new printer language.

Utilities or jobs that you download to the printer sometimes include 
resources (for example, fonts, macros, or patterns). Resources that 
are internally marked as permanent remain in the printer's memory 
until you turn the printer's power off. 

Use the following guidelines if you make use of the PDL (page 
description language) ability to mark resources as permanent. For 
technical details, see an appropriate PDL reference for PCL or PS.

●

Mark resources as permanent only when it is absolutely 
necessary that they remain in memory while the printer's power is 
turned on.

●

Send permanent resources to the printer only at the beginning of 
a print job and not while the printer is printing.

Overusing permanent resources or downloading them while the printer 
is printing might decrease the printer's performance or its ability to print 
complex pages.