Справочник Пользователя для HP (Hewlett-Packard) 4100N

EN

Loading trays 2, 3, and 4 47

Trays 2, 3, and 4 are 500-sheet paper 
trays. Tray 3 is optional and comes with 
the 4100TN and 4100DTN models. Tray 
4 is an additional 500-sheet option.

The trays adjust for six standard sizes of 
media, as well as for many custom sizes 
(for details, see “Supported sizes and 
weights of paper - trays 2, 3, and 4” on 
page 190). Three adjustments on the 
trays let the printer sense the paper size 
that is loaded. 

To avoid paper jams, do not load trays 
while the printer is printing.

Pull the tray completely out of the 
printer.

If the tray is not already set to the 
desired paper size, you will need to 
make up to three adjustments:

2A: To adjust the width, squeeze the 
lever on the left guide and slide the 
guides into place to match the width 
of the paper.

2B: To adjust the length, squeeze 
the lever on the rear paper guide and 
slide it to the desired paper size until 
it clicks into place. Standard sizes 
are labeled. For A5-size paper, lift 
the metal backstop near the center 
of the tray.

2C: To make the third adjustment, 
squeeze the blue tab located on the 
right side of the tray and move it to 
the correct position based on the 
paper size required.