Справочник Пользователя для APC ACRC100
InRow RC Installation
14
Positioning the Equipment
Service access
An area of 1143 mm (45 in) of
clear floor space in front and
914.4 mm (36 in) in back of the
equipment is required for service.
All required maintenance can be
performed from the front or back of
the equipment.
clear floor space in front and
914.4 mm (36 in) in back of the
equipment is required for service.
All required maintenance can be
performed from the front or back of
the equipment.
Leveling
The leveling feet provide a stable base if the floor is
uneven, but cannot compensate for a badly sloped
surface.
uneven, but cannot compensate for a badly sloped
surface.
Once the equipment is in its intended location, use a
screwdriver to turn each leveling foot until it makes
contact with the floor. Adjust each foot until the
equipment is level and plumb.
screwdriver to turn each leveling foot until it makes
contact with the floor. Adjust each foot until the
equipment is level and plumb.
You can remove the casters and leveling feet to allow the
equipment to rest directly on the floor.
equipment to rest directly on the floor.
na
15
65
a
Dimensions are shown in mm (in).
na
15
72
a