Справочник Пользователя для Everpure 325
Cold Drink Center (327/328) Operator’s Guide
3280020
Page 23
August, 2003
Programming Procedures
GAIN ACCESS TO THE SUPERVISOR MODE
1.
Press
. The display shows:
ENTER CODE
. You must enter the four-
digit supervisor code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
When you have entered the right code, you will hear two beeps and see
UNLOCKED
in the display.
2.
CONTINUE.
ENTER A NEW SUPERVISOR CODE
1.
Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2.
Press
. The display shows
SUPER XXXX
. The X's represent the
current supervisor code. Use the number keys to enter a new code.
NOTE
If you enter a new code, be sure to keep a written record of it.
There is no other way to access the SUPERVISOR mode.
3.
CONTINUE.
ENTER A FREEVEND CODE
(Supervisor Mode Only)
(Supervisor Mode Only)
1.
Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2.
Press
, then
until the display shows
FREE XXXX
. The X's
represent the current freevend code. Use the number keys to enter a new
code. If the code is anything other than "0000", it must be entered after the
key lock is turned in order to enable free vends.
code. If the code is anything other than "0000", it must be entered after the
key lock is turned in order to enable free vends.
3.
CONTINUE.