Листовка для InSinkErator H770-SS
6-3/8"
4-3/8"
11"
6-1/8"
6-3/4"
NOTE: Max counter thickness is 1".
1/4" Incoming
Water Supply
Water Supply
Inlet Tube
Flexible
Outlet Tube
Outlet Tube
Flexible
Vent Tube
Vent Tube
2-1/2"
Dimensions
Minimum 2" required
from sink hole center
to backsplash
from sink hole center
to backsplash
The original instant hot water
dispenser with easy-to-twist handle
dispenser with easy-to-twist handle
The Next
Necessity
™
Model
H770-SS
Submittal Sheet
Job Specifications
Instant Hot Water Dispensers
Sample Specification
Printed in USA
HWD297-07B-45-10
1-800-558-5700
www.insinkerator.com
www.insinkerator.com
•
Hot Only – Dispenses near-boiling 200°F
• 35% more near-boiling water from larger
2/3-gallon
2/3-gallon
stainless
steel
tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
protection to ease installation
• Provides 60 cups/hr of near-boiling water
• 3-Year We Come To You™ In-Home
Service
Service
Warranty*
• 120 volts, 750 watts, 6.25 amps
• Available in chrome with black handle
Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with 2/3-
gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
InSinkErator Model H770-SS with 2/3-
gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Specifications
Capacity
Electrical
Thermostat
Insulation
Valve
Shipping Weight
Recommended
Supply Pressure
Supply Pressure
Required
Hole Diameter
Hole Diameter
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
steel tank dispenses
60 cups of 200˚F
water per hour
Snap-action,
adjustable from
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
at 200˚F)
Meets U.L. 94HF-1
flammabiltiy
specification
flammabiltiy
specification
Instant, self-closing
30-125 psi
Approximately
7.4 lbs.
7.4 lbs.
1-1/4" – 1-1/2"
standard sink hole
standard sink hole
120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
© 2007 InSinkErator
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.