Справочник Пользователя для Samsung RF4267HA

operating

 

02

 OPERA

TING

If you don’t want to make more ice, touch 
this button. 
The icon will light up and the Ice-Maker 
stops making ice.

We recommend you stop ice 

making if the following occur:

-  There is enough ice in the ice 

bucket.

-  You want to save water and 

energy.

-  Water is not being supplied 

to the refrigerator.

If the ice maker function is ON, and 
the water Line is not connected,
there will be a water valve noise 
from the back of the unit, press the
Ice Off (Hold 3sec for child lock) 
button  for less than 3 seconds until 
the Indicator ( 

 ) illuminates.

 

If you do not touch any button, the freezer and fridge 
temperature indicator turn off in a few seconds.
If you touch any button, the display lights up again.

This icon will light up when you need to
change the filter.
After you use about 300 gallons of water,
the filter indicator lights up. (about 6 months).
After you install the new water filter, reset the 
filter indicator by touching the Alarm/hold 3 
sec for Filter Reset button.

•  If water is not dispensing or

dispensing slowly, you need 

to replace the water filter 

because the water filter is 

clogged.

•  Some areas have large

amounts of lime in their water, 

which causes the water filter 

to clog more quickly.

cHANGING THE WATER FILTER

To reduce risk of water damage to your 
property, DO NOT use generic brands of 
water filters in your SAMSUNG Refrigerator. 

USE ONLY SAMSUNG BRAND WATER FILTER. 
SAMSUNG will not be legally responsible for any 
damage, including, but not limited to property 
damage caused by water leakage from use of a 
generic water filter. SAMSUNG Refrigerators are 

designed to work ONLY WITH SAMSUNG Water 
Filter.
The Filter light turns red to let you know when it is 
time to change your water filter cartridge.
To give you time to get a new filter, the red 
light comes on just before the capacity of 
the current filter runs out.
Changing the filter on time provides 
you with the freshest, cleanest water from your 
refrigerator.

1.  Shut off the water supply. Then, turn the water 

filter ( 

1 ) about 1/4 turn, counter-clockwise.

2.  Pull the water filter ( 1 ) from the case filter ( 2 ).

•  To change the water filter more easily, shut 

off the water supply valve.

•  Sometimes, it is hard to disassemble the water 

filter because impurities in the water cause it to 
stick. If you are having difficulties, grip the water 
filter firmly and pull it hard.

•  When you pull the water filter, a little water 

can leak from the opening. 

This is normal. To minimize the water leaks, keep the 
filter cartridge horizontal 
when you pull it.
•  To prevent overflow, 

empty the water filter 
tray ( 

3 ) and dry around 

the filter case ( 

2 ).

3.  Insert the new filter into the filter case ( 4 ).

4.  Push the filter, and then turn it clockwise until it 

locks.

•  If you have trouble inserting the water filter 

because of high water pressure, shut off 
the water supply valve.

•  The locked symbol should be lined up with the 

indicator line.

(Red)

WARNING

2

1

3

2

4

DA68-02481A-0.2.indb   13

2011.3.7   9:21:40 AM